Maruti Suzuki Swift Rear Wide Stance Branding Decal BLACK Reflective Radium

Maruti Suzuki Swift Rear Wide Stance Branding Decal BLACK Reflective Radium

Size : 1.5 x 20 Inches

Reflective Radium Color : BLACK 

Why to ORDER with Us (why not with local art shop?):

·          Accurate dimensions as designed by Brand's Experienced Designers; not as the locals who alters designs as per their convince.

·          We Provide Excellent Quality Materials and processed by Industrial grade Machines.

·          We know Paint Job Importance so we manufacture products which will not leave any marks or shade of color on your dream machine.

·          We provide required step by step How to apply guide to make sure it placed correctly on your car.

·          Advantage ordering online : Saves your Precious Weekend Time. No Hassel with the local car decors. 

·          Hassle free Shopping experience. Every time.

How to apply a car decal ?

STEP 1: CLEAN THAT AREA GOOD!

First make sure you have a dry place and no wind to install your decal. Make sure to prep the area, this is the most important part of installing a decal!  Don't put your decal or sticker on a dirty surface, it will just pick that dirt and aren't so sticky. So lets make sure the area is nice and clean so that it can adhere to where you are going to place it.  You can use Petrol for rubbing since it dries by itself within seconds and leaves no residue behind.   

STEP 2: DECIDE AND PEEL!

After you have cleaned your car, you now need to decide where you want to center your decal in the area you cleaned. Be aware after you stick it, you might can not undo it and use it again, since it can separate the design or text from each other.  After you decide where you want it, go ahead and start to peel your decal back, if it doesn't stick to the transfer tape the first pull, replace the transfer tape and push it together with your fingers or use a ATM Debit card to press together.

STEP 3: PLACE THAT DECAL!

So you cleaned your area and also decided how and where you are going to place your new decal or sticker and you made sure your decal can peel apart easily. 

For Smaller Decals -

Now fully peel the decal off the backing and hold it on the tips of the masking/transfer tape.  Try not to touch the back of the decal itself since it could leave dirt on your decals back side.

You should have each hand holding the furthest corners from each other and keep it tight so that the decal does not fold in on itself.  Place one end of the decal down and then smooth it out to the other end till the decal is fully placed. 

For Bigger Decals -

Do not fully remove the backing on your decal.  You will want to remove about 1/3 of the backing and start by applying that 1/3 of the decal to the car.  Then slowly pull more of the backing off while at the same time apply the decal to the car until you have fully installed the decal.  Either work left to right or right to left, which ever you feel best doing.

Don't forget you can always buy a  spray bottle at a store near you, put ONE small drop of soap in it and fill with water and shake.  Then LIGHTLY (I MEAN LIGHTLY)  spray the area and then apply the decal.  This is only suggest for bigger decals or decals that you need to be in a precise area.

STEP 3: THE HARDEST PART!

Waiting... yes this is the hardest part, because most people are so impatient that they can't wait and they mess up the decal by removing the transfer tape too early!

The best way to allow your decal to dry is out in the sun, having it in the shade or in a cool place will only make it take longer.  If you used a mist of soapy water when installing your decal and do not let the sun dry it, then it will take a very long time before it adheres correctly, since nothing is there to remove the water and dry the decal to the surface.